Construction

Browse Videos


Abrasive Blasting – SS1024HE (12 min.)
Description
Sandblasting and other abrasive blasting is a potentially life-threatening operation without proper training. This video covers all of the important topics including PPE, equipment set & inspection, safe operating procedures, job site conditions, bystander safety and more!
Abrasive Blasting – SS1024HS (12 min.) SPANISH
Description
Sandblasting and other abrasive blasting is a potentially life-threatening operation without proper training. This video covers all of the important topics including PPE, equipment set & inspection, safe operating procedures, job site conditions, bystander safety and more!
Aerial Lift Work Platform – SS1025GE (15 min.)
Description
Aerial work platforms provide access to work areas that were one difficult or impossible to reach. But, there are potential hazards involved. That’s why anyone operating an aerial work platform must be trained and authorized before using the equipment. This program covers a broad range of topics including: Pre-Shift Inspections Operating Controls Safe Operating Procedures Driving and Steering Speed Control Fall Protection and others.
Caught in/Between Hazards - M276E (15 mins)
Description
MARCOM's Video On Demand (VOD) program on Caught-In/Between Hazards in Construction Environments provides the information employees need to recognize the caught-in/between hazards that are associated with construction tasks and avoid them before accidents happen. Caught-in/between accidents occur when a person is squeezed, caught, crushed, pinched or compressed between two or more objects. They are one of the four top causes of fatalities in construction work, and can result in serious injuries as well. Topics covered in this program include the three major types of caught-in/between hazards; vehicles and heavy equipment; powered tools and machinery; and more. This VOD program is one of the most effective and efficient ways to get employees the training that they need, in a classroom or individually through their desktop or tablet computer. The program can be delivered through your distributor or loaded onto your own delivery system.
Confined Space Entry SS1055HE (10 Min.)
Description
Confined Space Entry is a potentially hazardous situation, perhaps even fatal. But it doesn't have to be. If procedures are followed, Confine Space Entry can be done safely and without incident. This video: Defines Confined Space Hazards How to Control Hazards Confined Space Permits Air Testing Emergency Procedures
Confined Space Entry SS1055HS (10 Min.) Spanish
Description
Confined Space Entry is a potentially hazardous situation, perhaps even fatal. But it doesn't have to be. If procedures are followed, Confine Space Entry can be done safely and without incident. This video: Defines Confined Space Hazards How to Control Hazards Confined Space Permits Air Testing Emergency Procedures
Crane Safety in Construction Environments - M124E
Description
Topics covered in these products include: Recent changes in the OSHA crane regulations. Operator certification. Equipment inspection and hazard assessment. Boom, jib and overhead cranes. General and operational safety devices. Crane operations and hand signals. Working around power lines. and more.
Crane Signal Person Basics - AP4034E
Description
Crane Signal Person Basic Training is an important resource to help crane signal people and crane operators learn the 2 standardized hand signals as described in ASME B3.5 and OSHA 29 CFR 1926. This program presents: A general overview of crane operations and limitations Clear demonstrations of the 2 standard crane hand signals An explanation of correct voice signal communication Guidelines for using non-standard and new signals Basic safety practices for a crane signal person
Crystalline Silica Safety - SS1090IS (10 Min.) Spanish
Description
Crystalline Silica can be found throughout many industries. Respirable crystalline silica are the small particles created when cutting, sawing, grinding, drilling, and crushing stone, rock, concrete, brick, block, and mortar. This program covers basic safe work practices that employees should know and follow to help prevent harmful exposure to crystalline silica.
Crystalline Silica Safety - SS1091IE (10 Min.)
Description
Crystalline Silica can be found throughout many industries. Respirable crystalline silica are the small particles created when cutting, sawing, grinding, drilling, and crushing stone, rock, concrete, brick, block, and mortar. This program covers basic safe work practices that employees should know and follow to help prevent harmful exposure to crystalline silica.
Fall Protection in Construction Environments - SSM261S (12 mins) Spanish
Description
Fall Protection in Construction Environments provides the information employees need to work safely when they are off the ground, and satisfies the major training requirements in the OSHA Standard on Fall Protection. Falls are the second leading cause of death each year in the United States (after traffic accidents)! Over 10,000 people are killed every year as a result of falls…and 200,000 to 300,000 people are disabled. Eight-five percent of all falls that occur on the job result in lost work time. Areas covered in the course include the seriousness of fall hazards, types of environments where falls may occur, the fall protection plan, concentrating and keeping a clear head, the importance of housekeeping in preventing falls, measures that can be taken to protect against falls, protective equipment, and more.
Fall Protection in Construction Environments – SSM261E (12 mins)
Description
Fall Protection in Construction Environments provides the information employees need to work safely when they are off the ground, and satisfies the major training requirements in the OSHA Standard on Fall Protection. Falls are the second leading cause of death each year in the United States (after traffic accidents)! Over 10,000 people are killed every year as a result of falls…and 200,000 to 300,000 people are disabled. Eight-five percent of all falls that occur on the job result in lost work time. Areas covered in the course include the seriousness of fall hazards, types of environments where falls may occur, the fall protection plan, concentrating and keeping a clear head, the importance of housekeeping in preventing falls, measures that can be taken to protect against falls, protective equipment, and more.
Hand & Power Tool Safety SS1094IE (10 Min.)
Description
Everyone uses Hand & Power tools. But, because they are common, people often forget about the hazards involved. Tool accidents result in thousands of serious injuries and hundreds of deaths each year… most of which could have been avoided by simply handling tools safely. To avoid these types of accidents employees need to know how to handle their tools safely. This program is a great place to start.
Hand & Power Tool Safety SS1094IS (10 Min.) Spanish
Description
Everyone uses Hand & Power tools. But, because they are common, people often forget about the hazards involved. Tool accidents result in thousands of serious injuries and hundreds of deaths each year… most of which could have been avoided by simply handling tools safely. To avoid these types of accidents employees need to know how to handle their tools safely. This program is a great place to start.
Hazard Communication in Construction Environments - M221AS (20 mins) Spanish
Description
Hazard Communication in Construction Environments both introduces employees to the Hazard Communication regulations and provides training on the various groups of chemicals found in the construction environment. Created specifically to assist construction workers of all types in complying with federal, state and municipal Hazard Communication regulations, the course addresses the major education and training requirements in these chemical hazard laws. Areas covered in the course include background of the regulation, GHS Safety Data Sheets and container labels, toxins, corrosives and irritants; flammables, combustibles and gases; carcinogens and radiation, exposure situations, personal protective equipment and chemical storage, spills and clean-up and more. This VOD program is one of the most effective and efficient ways to get employees the training that they need, in a classroom or individually through their desktop or tablet computer.
Hazard Communication in Construction Environments – M221AE (20 mins)
Description
Hazard Communication in Construction Environments both introduces employees to the Hazard Communication regulations and provides training on the various groups of chemicals found in the construction environment. Created specifically to assist construction workers of all types in complying with federal, state and municipal Hazard Communication regulations, the course addresses the major education and training requirements in these chemical hazard laws. Areas covered in the course include background of the regulation, GHS Safety Data Sheets and container labels, toxins, corrosives and irritants; flammables, combustibles and gases; carcinogens and radiation, exposure situations, personal protective equipment and chemical storage, spills and clean-up and more. This VOD program is one of the most effective and efficient ways to get employees the training that they need, in a classroom or individually through their desktop or tablet computer.
Heat Stress: Facts & Prevention - SSG001E (9 Min.)
Description
Heat Illness...it can happen to just about anybody working in hot or humid conditions. It can be serious. It can be fatal. But, it' doesn't have to be. A few simple, easy to do steps can mean the difference between just another day at work and a serious medical emergency. This video outlines these steps in an easy to understand manner.
Housekeeping: Slips, Trips and Falls Prevention - SSCN001 (6 mins)
Description
Housekeeping/Slips, Trips & Falls A construction site can become a very messy place. But, the longer it stays that way, the more dangerous it becomes. This video outlines the connection between good housekeeping and injury prevention, especially slips, trips & falls. Common trip and fall hazards are shown and the root causes are examined for maximum impact.
Industrial Cranes: Safety Is In Your Hands - SS1026H (15 min.)
Description
Cranes. Useful tools. Powerful tools. Tools that need to be treated with respect. Why? The reason is simple. Any mistake with a crane, even a small mistake can have serious consequences including property damage, injury or even loss of life. Knowing how to use the equipment properly and following established policies and procedures can help minimize risk. That’s what this program is all about, the basics of crane safety.
Overexertion Prevention – SSC018GE (14 min.)
Description
Engineers and maintenance personnel know from experience that moving parts in equipment and machinery, if not properly used and maintained, are subject to wear and tear. Yet when it comes to our own bodies, we often think of them as indestructible. Overexertion type injuries are the highest percentage of worker compensations costs representing nearly 30 cents of every $1 in claims paid. These types of injuries are often associated with lifting, pushing, pulling, tossing and handling material. In this effective and motivational program, your employees will learn how the body functions, risk factors associated with overexertion type injuries, and preventive measures they can utilize to reduce their exposure and prevent injuries. The program teaches the impact their posture can have on their body and the cumulative affect of improper lifting techniques. The visual graphics and comprehensive information will educate and motivate your employees to make the proper decisions and lifestyle adjustments to ensure their health and safety.
Pre-Shift Walk Around Inspection: Backhoes SSC017EE
Description
Backhoes must be inspected before they are operated, every time its operated. It’s the law. A proper inspection protects the operator and those working nearby by ensuring that the equipment is mechanically safe. That’s what this video is all about, how to preform a thorough and accurate pre-shift inspection. The equipment is broken down into 4 quadrants to ensure accuracy and consistency for every inspection.
Safety Bob’s Comprehensive Construction Orientation – E1316E (24 min.)
Description
Construction work is very dangerous, as nearly 1,000 workers are killed and thousands of others are injured on construction jobsites each year. While there have been many safety improvements over the years to control the hazards that contribute to these incidents, new and inexperienced workers still get hurt on the jobsite way too often. This program stresses the point that these workers must be responsible for their own personal safety. Construction Safety Specialist Bob Synnett discusses the hazards of construction work and what actions construction workers can take to avoid mishaps on the job. Topics include PPE, Excavation, Ladder Safety, Scaffolding, Fall Protection and Electrical Safety.
Safety Bob’s Comprehensive Construction Orientation – E1316S (24 min.) Spanish
Description
Construction work is very dangerous, as nearly 1,000 workers are killed and thousands of others are injured on construction jobsites each year. While there have been many safety improvements over the years to control the hazards that contribute to these incidents, new and inexperienced workers still get hurt on the jobsite way too often. This program stresses the point that these workers must be responsible for their own personal safety. Construction Safety Specialist Bob Synnett discusses the hazards of construction work and what actions construction workers can take to avoid mishaps on the job. Topics include PPE, Excavation, Ladder Safety, Scaffolding, Fall Protection and Electrical Safety.
Scissor Lifts in Industrial and Construction Environments – M172AS (13 mins) Spanish
Description
Excellent training program for anyone working on or near scaffolding. Attention given to safety rules, operating procedures, and safe use of scaffolds. Meets scaffold training requirements.
Telehandlers: Safe Operation - SSC018S (12 min.) SPANISH
Description
The Telehandler is a versatile piece of equipment found on almost every job site. These unique machines can lift up to 10,000 loads and extend outwards 30 to 40 feet. Because of the size and power of this machine the safety and training of for this equipment is very important.
Telehandlers: Safe Operation – SSC018E (12 min.)
Description
The Telehandler is a versatile piece of equipment found on almost every job site. These unique machines can lift up to 10,000 loads and extend outwards 30 to 40 feet. Because of the size and power of this machine the safety and training of for this equipment is very important.
Trenching and Shoring: Excavation Safety SSC003E (13 Min.)
Description
This program covers the hazards of trenching, soil types and protective systems, the competent person, worksite inspection, testing, access, egress, setback and equipment, working defensively and more.
Walking and Working Surfaces In Construction – M19055 (17 min.)
Description
Topics included in this safety video are: Causes of fatalities Soil Causes of cave-ins What is a trench OSHA standards What the competent person must do Inspections Hazardous atmospheres Water control Soil classification Manual testing The pocket penetrometer. Extremely important topics include: General considerations Inspecting fall protection components Storage and maintenance Webbing Hardware Ropes Retrieval systems When to replace parts Buddy system Personal fall protection and more